Nokia 9000il User Manual download pdf (Page 88)

10-8 Install/Remove software

… Press Open to open the folder containing the

file(s) you want to transfer.

Select a file by moving the selection frame

over it. If the file you want is in a different

folder, press Close and select another folder.

If you want to copy more than one file, use

multi-selection (Ctrl+space bar) or repeat the

procedure from step 1.

† Press Copy to PC to start file transfer.

Before files can be copied to a PC, you must

change the name of the copied file to a PC com-

patible format. The File transfer application will

suggest a name, but you can also enter it your-

self. The name may contain eight characters and

the extension three characters.

Transferring files to the

communicator

After the connection type and PC drive have

been selected in the settings:

• Press the left arrow key to activate the com-

municator window.

‚ Select the correct destination folder and

press Open.

ƒ Press Change window to activate the PC

window.

„ Press Open to open the directory containing

the file(s) you want to transfer. The window

shows the subdirectories and then the files in

alphabetical order. Open a subdirectory, if

necessary, then select the file by moving the

selection frame over it.

… Press Copy from PC to start the file transfer.

If you want to copy more files, repeat the

procedure from step 1.

To terminate the connection to the PC, press

Disconnect.

Install/Remove software

The Install/Remove software application enables

you to install communicator software from a PC

and to remove the software from the communi-

cator later.

The Install/Remove software main view displays

the serial connection type and the PC drive used.

Press Settings to change the connection type or

to redefine the PC drive used. The connection type

is changed by pressing Change. The directory

name and path can be edited manually.

Before using this application, make sure that the

connectivity software (Nserver) has been in-

stalled on your PC (see ”Connecting to a PC” on

page 10-6).

To install software:

• Start the Nserver software.

‚ Press Install in the Install/Remove software

view. The communicator starts to search for

software to install from the designated PC

drive. If installable software is found, it will

be listed on the screen.

ƒ Select the software you want to install with

the selection frame and press Install.

When installation is complete, the confirmation

note tells you under which application button

the software was installed (destination cannot

be selected). If an application already exists

which has the same name as the software to be

installed, you will be asked to confirm the re-

placement operation by pressing Replace or to

cancel it with Cancel.

To remove software:

• Press Remove to search for removable soft-

ware on the communicator. The amount of

free space on your communicator is also

displayed.

‚ Select the software you want to remove and

press Remove.

Note: The set of applications which are on the

communicator at the time of purchase

cannot be removed.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 129 130

Comments to this Manuals

No comments