Nokia 9000il User Manual download pdf (Page 67)

7-16 Define Telnet connections

Telnet

To activate the Telnet application:

1 Go to the Internet applications main view.

2 Scroll down to Telnet and press Select.

The Telnet application is used to make a connec-

tion to a remote computer via the Internet.

The Telnet application is similar to the Terminal

application, in that both applications emulate

the VT100 terminal display (see Figure 7-8).

The display occupies the left side of the screen

(screen size is 80 characters in 24 lines).

Once a Telnet connection is established, you

must (in most cases) enter your login name and

password in order to be able to use the services

provided by the host computer. The Telnet main

view shows all pre-defined Telnet hosts.

To connect with a pre-defined Telnet host, select

a host and press Connect (see "Define Telnet

connections: Telnet commands" on page 7-16).

To create new or edit existing connections, press

Define (see "Define Telnet connections" below).

Define Telnet connections

To create new or edit existing connections:

Go to the Telnet main view and press Define.

The defined Telnet connections will appear.

To edit an existing connection, press Edit.

To define a new Telnet connection, press New.

To delete the selected connection, press Delete.

Pressing Edit or New opens the Define Telnet

connection view, where you can define the

following settings:

Connection name — Edit an existing or enter a

new connection name. The name can be defined

freely.

Destination host — Edit an existing or enter a

new connection address. The host is identified by

either a numeric IP address or a correct textual

host name.

Internet access — Select a service provider from

those currently defined. To change the preferred

service provider, press the Change command

button.

Backspace key — Defines whether the keyboard

backspace key is used as a backspace (BS - de-

fault) or delete (DEL ) key.

Telnet commands

When you have connected to the remote system,

the following commands become available (see

Figure 7-8):

Keys

Texts

Zoom in / Zoom out

Hang up

Press Keys to emulate the VT100 special keys

which are not available on the communicator

keyboard. The special keys include:

• Four VT!00 function keys (PF1-4). The specific

function of these keys depends on the service

or program you are connected to.

• All VT100 application keypad keys (numbers

1-9, minus, comma, period, dash, enter).

• The following VT100 functions: reset

terminal, Ctrl-\, Ctrl-], Ctrl-~.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 129 130

Comments to this Manuals

No comments