Nokia LPS-5 User Manual download pdf (Page 15)

Basic use

■ Clear settings or reset

To clear your pairing, loopset volume, sidetone, and vibration mode settings

from the loopset, switch on the loopset, and press and hold the multifunction

key and the volume up key for about 5 seconds. The indicator light alternates

red, green, and blue twice, and the loopset enters pairing mode.

To reset the loopset if it stops functioning, even though it is charged,

connect the loopset to a charger while you press and hold the

multifunction key. The reset does not clear the settings.

■ Troubleshooting

If you cannot connect the loopset to your compatible device, check that

the loopset is charged, switched on, and paired with the device.

Also check that the loopset is within 10 metres (33 feet) of the device that

you have connected to it.

If you still have problems, reset the loopset. See “Clear settings or reset”,

p. 15.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

No comments

Nokia LPS-5 User Manual Page 15