Owner’s Manual MEDIAMASTER 9660S
GB 11 Once you have correctly connected the Mediamaster, you also have to perform some “Basic Settings”. During this procedure, helpful information
GB 12 To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus.
GB 13 Predefined Channel Select one of the predefined channel alternatives Predefined Channel. Adjust Motor Use the RIGHT / LEFT buttons to adjust the
GB 14 In order to keep the Mediamaster up-to –date, it will be possible to download new version of the system software via satellite and from the i
GB 15 You can enter a special LNB frequency, which is not presented in the LNB Type list as above. 22KHz Tone Switch: If you have connected to a D
GB 16 corresponds to the antenna which you wants to use for the search. Transponder Freq (MHz): Specify the frequency in GHz. using the numbered butto
GB 17 To start the Mediamaster from stand-by mode, press the “ ” button or one of the numbered buttons on the remote control. It is also possible to s
GB 18 The display on your Mediamaster and on the TV screen will show the name of the audio channel you are listening to. While in audio mode, you can
GB 19 To watch TV programmes again, press the TV button or stop the VCR. Please note, that during the recording of a programme, everything shown on t
GB 20 These guides will give you an overview of programme information from the TV/Radio channels. Step to different channel numbers with the UP/DOWN
GB 3 Contents FOR YOUR SAFETY 4 Rear panel 4 Front panel 5 INSTALLATION
GB 21 From here you can create your own favorite lists, containing the channels you watch most frequently. You can give each list a specific name in
GB 22 From here you can change the menu language. You also have access to the Parental Control and the Appearance menus. By pressing OK on the line
GB 23 From here you can adjust settings concerning your TV. TV Screen Format: Select your TV screen format. The 4:3 format is the standard format fo
GB 24 Time Setting You can select the operation mode of the On/Off timer by pressing LEFT/RIGHT button on the remote control. Ÿ Once: The Mediamaster
GB 25 Select this Menu from the line “Installation” in the Main Menu. The submenu will give you the opportunity to change the preferences perform
GB 26 This will start the Installation procedure from the “Welcome Menu”. When you press OK in the “Welcome Menu” again, be aware of the fact, that
GB 27 ACCESS code Personal Identification Number. A four -digit code stored in the memory. You can change ACCESS code on the “User Preference” Menu
GB 28 Problem Possible causes What to do The display on the front panel does not light up/is not lit. Mains lead is not connected. Check that the
GB 29 Transmission Standards DVB,MPEG2 LNB/Tuner input Connector 2 x F-type (Loop Through) Input frequency 950-2150MHz M
GB 30 System Settings 1.TV Screen Format 2.Output Selection 3.UHF Channel Number 4.RF Modulator Type 5.Information Box Time out 6.Display Volume Indic
GB 4 Keep a clear space around the Mediamaster to allow for sufficient ventilation. Do not cover the Mediamaster or place it on a unit that emits he
Nokia is a registered trademark of Nokia Corporation www.nokia.com KQX1A674Z
GB 5 The box for your Mediamaster should contain the following items: Mediamaster 9660S includes About the SCAR
GB 6 Installing the satellite dish Ÿ Your satellite dish should be installed with a cable for you to connect to the Mediamaster. If you do not have t
GB 7 Refer to your video recorder manual for full instructions. Ÿ Connect one SCART cable between the main SCART socket on the TV and the TV SCART soc
GB 8 Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi sy
GB 9 To be able to receive scrambled digital satellite channels you will need a Common Interface CA (Conditional Access) module and a smartcard from
GB 10 This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out u
Comments to this Manuals